RVZWN//TOOLS

> SECTOR_05 // ENCODERS & DECODERS // LINE_CODING

Line Coding & Signals

Turn bits into the signal on the wire. Compare unipolar, polar and bipolar line codes on the same data, add 4B/5B or 8B/10B block coding, load 10BASE-T, 100BASE-TX, T1, E1 or ISDN, read the DC, transitions and spectrum, and decode a level sequence back to bits. Runs in your browser.

LOCAL_PROCESSING // NO_UPLOAD

How it works
  1. Enter bits (or text, or hex bytes) and pick one or more line codes. The waveform is drawn at once, one lane per code, on the same bits.
  2. Optionally put a block code in front: 4B/5B or 8B/10B turn the data into longer codes with guaranteed transitions or a balanced line, as in Fast and Gigabit Ethernet.
  3. Use the Standards buttons to load a real case: 10BASE-T, 100BASE-TX, 100BASE-FX, 1000BASE-X, T1, E1 or ISDN BRI. Switch to Decode to turn a level sequence back into bits and see where it breaks the rules of the code.
Unipolar and polar NRZ/RZ, NRZ-I, Manchester (both conventions), differential Manchester, AMI, pseudoternary, B8ZS, HDB3, MLT-3 and 2B1Q are included. Scrambling codes mark the substituted pulses: V is a bipolar violation and B a balancing pulse. The measurements show the DC component, the transition density, the longest run without a transition and the signalling rate, and the spectrum shows how much of the energy sits near DC. Waveforms can be saved as SVG or PNG and the signal as CSV. Everything is computed in your browser; nothing is uploaded.