RVZWN//TOOLS

> SECTOR_05 // ENCODERS & DECODERS // SUBNET_CALCULATOR

Subnet Calculator

Enter an address with a prefix or netmask and see the network, broadcast, usable hosts, wildcard mask and reverse DNS, for IPv4 and IPv6. Split a network into equal subnets, plan a VLSM layout from the hosts each subnet needs, or merge networks and ranges into the shortest CIDR list. Everything is calculated on your device.

LOCAL_PROCESSING // NO_UPLOAD

How it works
  1. Type an IPv4 or IPv6 address with a prefix (192.168.1.10/24), a netmask (10.0.0.0 255.255.0.0) or a wildcard mask. You get the network, broadcast, usable range, host counts, address type and reverse DNS name, with the network and host bits colour-coded.
  2. Check whether another address falls inside the network, or split the network into equal subnets by prefix or by count.
  3. VLSM planner: list the subnets you need (name and number of hosts) and get an aligned plan that wastes the least space, with the free blocks left over.
  4. Summarise: paste networks, single addresses or ranges and get the shortest list of CIDR blocks that covers exactly the same addresses.
Results can be copied or saved as CSV or TXT. IPv4 /31 (two hosts, RFC 3021) and /32 (one host) are handled as such. All calculations run on your device; nothing is sent anywhere.